Regenerative Air Blowers for Aquaculture and Water Treatment – Hyper Spin Blowers
Regenerative Air Blowers for Aquaculture and Water Treatment
HyperSpin Blowers have been designed and manufactured based on the principles of reliability, efficiency and quality. Thanks to their construction, the impellers are connected directly to the motor shaft and the bearings are located outside the compression chamber, so the air discharge is completely oil-free and does not require lubrication.
Their manufacture based on cast aluminum makes them much lighter while producing less noise.
HyperSpin Blowers have an IP55 protection level (insulation class F) and are UL, CE and CCC approved.
Specs
| Model | CFM @ 50 ”Deep | M3/hr @ 1.27 M Deep | Max. Continuous Operation Depth (M) | Max. CFM at Continuous Operating Depth | Max. M3 / hr at Continuous Operating Depth | Hp | Phases | Voltage | Hz | Weight (Kg) |
|---|---|---|---|---|---|---|---|---|---|---|
| HSB-19.5HP-A38 | 630.2 | 1070.0 | 2.6 | 530.1 | 900.0 | 19.5 | 3 | 230-460 | 60 | 118 |
| HSB-11.5HP-A36 | 300.4 | 510.0 | 4.0 | 176.7 | 300.0 | 11.5 | 3 | 230-460 | 60 | 72 |
| HSB-6.5HP-A315 | 206.2 | 350.0 | 2.6 | 144.3 | 245.0 | 6.5 | 3 | 230-460 | 60 | 45 |
| HSB-4.5HP-A295 | 159.0 | 270.0 | 2.3 | 126.6 | 215.0 | 4.5 | 3 | 230-460 | 60 | 38 |
| HSB-2.5HP-A235 | 106.6 | 181.0 | 2.1 | 64.2 | 109.0 | 2.5 | 3 | 230-460 | 60 | 24 |
| HSB-1.0HP-A195s | 57.7 | 98.0 | 1.4 | 54.2 | 92.0 | 1.0 | 1 | 230 | 60 | 16 |
| HSB-0.5HP-A135s | 44.2 | 75.0 | 1.6 | 16.5 | 28.0 | 0.5 | 1 | 115 | 60 | 12 |